UltraScan PRO Spectrophotometer

The UltraScan PRO is designed to be your reference instrument for measuring both reflected and transmitted color. It meets CIE, ASTM and USP guidelines for accurate color measurement. The instrument's 5 nm optical resolution enables it to precisely measure colors using colorants with sharp cutoff characteristics.

Accurate Color Measurement with UltraScan PRO

The Professional Color Measurement Spectrophotometer

The D65 illumination source is calibrated in the ultraviolet region for the accurate measurement of whitening agents. UltraScan PRO has an extended wavelength range into the near infrared and near ultraviolet that permits the measurement of camouflage materials and UV blockers. The system uses diffuse/8° geometry with automated specular component inclusion/exclusion. It also features three sizes of sample measurement areas with automated lens change. The UltraScan PRO includes EasyMatch QC software and an electronic record keeping version that is 21 CFR 11 compliant is available.


Use UltraScan PRO for both research and quality control. From opaque solids to clear liquids to transparent films, UltraScan PRO precisely measures both reflected and transmitted color, spectral reflectance, spectral transmittance and transmission haze. A host of measurement features and specialized sample-handling devices make UltraScan PRO the most versatile high-performance color measurement spectrophotometer available.


UltraScan PRO BASE
  • Measures reflectance, transmittance and haze

  • Wavelength range 350 nm - 1050 nm

  • 5 nm optical resolution and reporting interval

  • Three reflectance measurement areas

  • Exceptional inter-instrument agreement

  • Automated UV calibration and control

  • Large transmission compartment open on three sides

  • Includes EasyMatch QC software

UltraScan PRO Features

Transmission Clamp

C02-1005-444

Holds transparent film, glass or plastic in position for total or regular transmission measurement.

Transmission Clamp

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202

Enables the use of 10mm and 20mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are pur- chased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4ml for 10mm path length and 0.8ml for 20mm path length.

The thick walled cells (having 4mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4mm internal width are available from Fisher Scientific.

Semi-Micro Cell Holder and Optical Assembly

Transmission Spill Tray and Cell Holder

D02-1011-568

Permits transmittance measurement of liquids using rectangular transmission cell (below). Cells purchased separately.

Transmission Spill Tray and Cell Holder

Transmission Cell (Rectangular)

13-8573-40 (10 MM)

04-4592-00 (20 MM)

13-8573-20 (50 MM)

Provides consistent placement of 10 mm, 20 mm, 33 mm or 50 mm path length transmission cells - purchased separately.

Transmission Cell (Rectangular)

Transmission Holder for 10-mm Plastic Cell

CMR2987

Provides consistent placement of a disposable, 10-mm path length (32.5mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics at www.lumelite.com as part # 24022642.

Transmission Holder for 10-mm Plastic Cell

Flow Through Cell Holder

Provides a cell holder that is mounted in the transmission compartment for supporting a flow cell. Cell purchased separately.

Flow Through Cell

A 51 mm (2 inch) diameter optically clear flow through glass cell with a path length of 10 mm, 20 mm or 50 mm.

C04-1001-958 (10MM)

C04-1001-959 (20MM)

C04-1001-960 (50MM)

Flow Through Cell Holder

Round, Capped Cell

A13-1011-613

A round, screw capped, optically clear transmission cell with10mm path length and 4.0ml volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Round, Capped Cell

Semi-Micro Powder Holder

D02-1012-313

Permits the reflected color measurement of as little as 0.4cc of packed powder. Powder is placed in the powder holder and is backed with the white plunger.

Semi-Micro Powder Holder

Reflectance Sample Shelf with Light Cover

B02-1005-172

For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell (below). Cells purchased separately.

Cells (Rectangular)

Optically clear glass cell with depth of 10mm, 20mm or 50mm; 55mm width x 57mm height. (Listed on front page)

Reflectance Sample Shelf with Light Cover

Compression Clamp Kit

D02-1011-132

Used for compressing fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression clamp, port plate cup holder and a 2.5 inch (64mm) glass sample cup.

Compression Clamp

Consists of port plate holder for 2.5 inch sample cup.

Compression Clamp Kit

Port Plate

D02-1012-386

Consists of port plate holder for 2.5 inch sample cup.

A02-1011-124

1 inch (25mm) with Glass

Port Plate

Adjustable Transmission Preform Holder

D02-1011-833

Measures preforms with shaft diameter from 10mm to 40mm. The length of the straight shaft above the preform threads should be at least 50mm in order to completely cover the port.

Adjustable Transmission Preform Holder

Adjustable Reflectance Preform Holder

D02-1011-841

Measures preforms with shaft diameter from 15 mm to 40 mm. The length of the straight shaft above the preform threads should be at least 50mm in order to completely cover the port.

02-7396-00: Skein Holder

04-7209-00: Glass Sample Cup, 2.5 inch (64 mm)

D02-1010-327: Footswitch Assembly

B04-1003-801: Transmission Cell, 33 mm

C02-1005-481: Transmission Cell Holder

A02-1011-184: Port Plate, 4 mm Round

D02-1011-550: Transmission Holder for 27-30 mm Round Tubes

Adjustable Reflectance Preform Holder
Color Test Malaysia Contact Us

HeadQuarters

MALAYSIA

Mecomb Malaysia Sdn Bhd

Lot 20, Jalan 225

46100 Petaling Jaya

Selangor Darul Ehsan

Malaysia


Direct Enquiry About Color Measurement Instruments

Shankaralingam Satgunalingam

Acting General Manager

Mecomb Malaysia Sdn Bhd

Tel: 03-7874 3422 | Fax: 03-7625 0868

Email: shankar.s@simedarby.com


Relevant Industries